Concrete Admixtures

Product Details:

Yp- Snf Based Admixtures is a high performance superplasticiser for concrete which is very effective in producing concrete with different levels of workability for applications such as pumping and flatwork. The dosage range for a certain degree of workability will substantially vary depending upon the water cement ratio.

 

Advantages

???     Dosage flexibility - provides up to 20% water reduction

???     Reduced water content for a given  level of workability

???     Provides better slump retention

???     Provides excellent workability

???     Faster setting at higher dosages compared to other water-reducing admixtures

???     Enhanced concrete strength and durability

???     Increased ease in finishing concrete

???     Provides lower in-place cost

???     Increases service life of structures

 

Typical Properties

Aspect: Dark Brown free flowing liquid
Relative Density: 1.24 ± 0.02
pH: Minimum 6
Chloride ion content: < 0.2%

 

Product Details:

Polycarboxylic ether based plasticizer for total consistency control of concrete (Water reducer cum retarding admixture)

Typical Properties

Aspect: Light-yellow to brownish free flowing liquid

Relative Density: 1.08 ± 0.02 pH: Minimum 6

Chloride ion content: < 0.2%

 

Uses

Ready mix concrete

Long hauls

Concrete where 5 to 20%water reduction is desired

Concrete where normalsetting times are required

Concrete where enhancedfinishing is desired

Concrete where flowability and increased durability areneeded

 

Advantages

Dosage flexibility - provides up to 20% water reduction

Reduced water content for a given level of workability

Provides better slump retention

Provides excellent workability

Faster setting at higher dosages compared to other water-reducing admixtures

Enhanced concrete strength and durability

Increased ease in finishing concrete

Provides lower in-place cost

Increases service life of structures

 

Product Details:

AEA 1010 is an air-entraining admixture which createsultra-stable air bubbles that are strong, small andclosely spaced. It may be used as part of a combinedadmixture system for the production of ready mixedconcrete or retarded mortar.

Product Details:

Non chloride accelerator cum hardener for early setting and strength development ofcementitious products


YP ACC C is an accelerating dry powder admixture for set acceleration and rapid hardening of cement basedmortar, concrete, screeding and render. It is formulated to accelerate the setting of cementitious mixes and toaid the attainment of high early strength in concrete and mortar mixes. It is suitable for use with cement andconcrete mixes, precast concrete, dense heavy duty renderings.