Grouting Compound

Product Details:

Alkali Free liquid accelerator for sprayed concrete for shotcreting

Description

Description:
YP SHOTSET 30 is an alkali-free, non-toxic liquid accelerator for wet & dry shotcreting. It ensures fast setting, reduced rebound, and strong bonding with minimal strength loss.

Applications:

 

• Tunnel & mine support

• Rock/slope stabilization

• Overhead & vertical shotcrete

Features:

• Alkali-free & non-caustic
• Fast setting, low rebound
• Chloride-free – safe for steel
• Low viscosity – easy pumping
• Compatible with OPC, PFA, GGBFS, silica fume

Specifications:

• Appearance: Beige-white liquid

• Density: 1.40 – 1.44

• pH: 1.5 – 3.5

• Dosage: 4–8% (up to 8%)

Packaging: 250 kg drums
Shelf Life: 4 months (sealed, cool storage)
Standards: IS 9103:1993, ASTM C1141

Additional Information:

• Delivery Time: 2-3 DAYS
• Packaging Details: 250 Barrel

Product Details:

Description

Non Shrink Cement Grout are the pre-packed ready to use high strength, free flowing Non-Shrink Cementitious grout. YP Grout NS2is a Portland-cement-based, shrinkage-compensated, high-strength grout. Its non-metallic formula does not rust, bleed, or harm metals on contact. Its cost-effectiveness makes it ideal for large jobs.

Features:

• Free flow-optimum contact
• Extended pot life

Typical Properties 

• Appearance:Grey powder
• Density: 2200 kg/m³
• 25 kg bag yield:  13l
• Water powder ratio: 0.14 - 0.18 (pourable & flowable)

 

Additional Information:

• Delivery Time: 2-3 Days
• Packaging Details: 25 kgs Bags

Product Details:

Description:
YP Smooth Coat is a polymer-modified, Portland cement-based coating designed for surface finishing and repair. It provides excellent adhesion and smooth finish with minimal water usage. Suitable for decorative coating and filling up to 10 mm.

Applications:

• Surface finishing for concrete

• Filling honeycombs and voids

• Coating structural columns

• Repairing minor surface defects

Key Features:

• High compressive strength

• Strong bond with concrete

• Non-bleeding, non-segregating

• No chloride admixtures

• Grouting thickness: 3–10 mm

• Can be used with YP SBR 100 for enhanced performance

Technical Details:

• Appearance: Grey powder

• Density: 2000 kg/m³

• Water-Powder Ratio: 0.30–1

• Initial Setting Time: >30 mins

• Final Setting Time: <2 hours

Coverage:
4–5 m² per 25 kg bag at 3 mm thickness (on smooth surfaces)

Packaging:
25 kg HDPE bags

Shelf Life:
6 months when stored in a cool, dry area away from direct sunlight.

Additional Information:

• Delivery Time: 2-3 Days